SAUNA TECHNICAL SPECIFICATIONS

MAIN STRUCTURE:

·        Sauna ceiling height sauna to its dimensions according to 225 CM - 240 between cm It should be designed.

WOOD CARCASS, WALL AND CEILING PANELS TO BE DONE:

·        All the wooden components used in the construction of the sauna are specially prepared through both drying and resin treatment processes. It must be baked, the joints of ceiling and wall paneling. places used tree kind of according to corner slats with It must be hidden. Panels hidden nail with must be assembled.

·        Wall panels in its production drink 4*2.5 on the surface cm And 5*10 cm in the cross-section first The substructure frame will be made of first-grade pine, spruce, or fir wood.

·        Wall And ceiling panels 7.5*1.9 cm in the cross-section first class extra clean with oven It must be made of Mediterranean pine wood that does not bleed resin. There should be no attached paneling on the walls or ceilings.

LIVING GROUPS, PLACE DOORMATS AND BACK LEANING:

·        Living groups carrier elements pine or in fir from the tree wall The panels should be mounted using a screw system with 4x4 cm frames at 50 cm intervals, according to their details and cross-sections.

·        Living groups sauna to its dimensions according to three multi-story in a way It should be planned. floor mats cleaning for easy movement will in a way piece aspect in place It must be manufactured.

·        Living groups, place mats And back leaning wooden Abachi (Ayous) It must be made of wood. The slats should be 9 cm wide and 2 cm thick. The slats should be mounted to the support elements using a concealed screw system.

DOOR INSTALLATION:

·        Sauna door 80/200 cm in its dimensions, wood with a box, 8 mm thickness, one-piece, tempered from glass manufacture should be done. It has no frame. Smoked colourful should be 2 piece Special hinges must be used. Heat insulation. To enhance durability, silicone sealant should be applied to the sauna door. A Misa brand mini roller lock system, embedded in the door frame, should be used.

INSULATION AND ELECTRIC PLUMBING TO BE DONE:

·        Wall in the panels possible heat their losses to prevent for 2.5 between cm and 8 cm  60 Mineral-based thermal insulation boards with aluminum foil compressed at cm intervals should be used.

·        Fire-resistant silicone is used between the sauna heater and the control panel, and in the lighting fixtures. cables should be used. Sauna inside no in the cable No additional information should be included.

·        Lighting, sconce navy hear systematic aspect It should be done. Listen It must be made of porcelain.

SECURITY:

·        To ensure safety in sauna cabins, Misa Sauna should be equipped with a panic button. In an emergency, the sauna panic button will both stop the Misa Sauna heater from working and trigger an emergency alarm bell in locations such as the reception, security, or common areas. .

ACCESSORIES:

·        Original Misa Sauna stove stone should be used.

·        1 pieces of wood Aquarius And A ladle must be found.

·        1 piece Abachi (Ayous) from the tree manufacture done mobile head It must have a pillow. (At least)